My server does not show up!

[Neiko]

I can play it myself but thats pointless, but when i refresh servers in the find servers. IT DOSENT SHOW UP! (its a dedicated server) i fowarded my ports already but it wont show up :/ helps?

it says in console when i start up my ded server.

Adding master server 69.28.151.162:27010
Adding master server 207.173.177.11:27010
No auth servers passed
Disabling Valve Authentication

[OkeiDo]

I don't know anything about servers but i hope you find out how to make it work =)

[Kommando]

Try write sv_lan 0 in the console.

If you still have the problem tell it here and I will try to help.

[Neiko]

yup, done that. that was the first i did. and i put it in my server.gcf for auto doing so. i fowarded my router (i hope) but i dont know if i did it right. could that be it? i bet it is. i just dont know what to do

[Kezei]

Are you using a firewall? If you are you need to open the following ports:

UDP/ 1200
UDP/ 27000 - 27015
TCP/ 27030 - 27039

If this problem persists your firewall is most likely interfering with the incoming connections.

[Neiko]

i dont know where to go to open those. if i knew for sure i woudnt ask :/

[pjb]

yeah i was having problems also but im gonna go try those ports

[Snakeblooood]

hmmm i think you have to use your browser....
fo example you type in 192.168.2.1
(right in your IE or Firefox or whatever) ...
then the routermenue should show up
...
(PS: this way I accidently found out that I was using the wirelesslan connection of my neighbour.. :-) )

[acehigh]

if you have a rotuer u cant make servers simple as that,

[ktrain]

Originally posted by acehigh@Jun 15 2005, 05:00 AM
if you have a rotuer u cant make servers simple as that,
Quoted post

wrong again ace ;(

[Chris_Zx]

ima take a screenshot of the fowarding page and post it here tell me if it suppose to be like that or did i do soething wrong.
RGIGHT HERE
http://img276.echo.cx/img276/2746/screenlinyiss4yi.png

[ktrain]

thats pretty messy, but should work

[DarkShadow]

Should work... ::zombie::

[Chris_Zx]

well it doesnt........

[Kezei]

Originally posted by acehigh+Jun 15 2005, 03:00 AM--><div class='quotetop'>QUOTE(acehigh @ Jun 15 2005, 03:00 AM)</div><div class='quotemain'>if you have a rotuer u cant make servers simple as that,
Quoted post
[/b]

@acehigh: Wrong. Ports can be opened for specific applications.

<!--QuoteBegin-Chris_Zx@Jun 15 2005, 06:13 AM
ima take a screenshot of the fowarding page and post it here tell me if it suppose to be like that or did i do soething wrong.
RGIGHT HERE
http://img276.echo.cx/img276/2746/screenlinyiss4yi.png
Quoted post
[/quote]


@Chris_Zx: First off change all of the hl and hl2.exe's to hlds.exe if the server you are running is a dedicate server. The 1200 port. Change that to 1200 to 1200. Not 1200 to 0.
Make sure that the port 27015 (default) is open and set on the hl.exe and/or hlds.exe depending whether or not you are running a dedicated or a listen server.

[Marine Eater]

Just as a note, if your server is hosted on a LAN you CANNOT see your own server on the internet. Try adding your server via the "Add Server" button.

[Chris_Zx]

TY GUYS for the configure (cant spell)

well i fixed them and it still didnt work so i went into my router and changed
the lan ip to my network ip and now everything works :D

[Neiko]

ah, well i got my cousin (18 year old, uses linux, and knows more that anyone i know about computers) and he fixed it. my only problem now is i need a new steam ID... :/ oh well. if anyone could, check out my server and reply here and tell me if my server works, if not well.... tell me. plzkthnks

It is
Zombies R Us | Zombiefall 24/7

[Neiko]

http://img245.echo.cx/img245/8136/portas3dy.jpg
is something wrong there?

[Spinfex]

Usually if you run a server on 1 computer on a network, and try to find it on the same computer or from another computer from the same internet, same network, you have to join the server by the lan ip. When I run a server I get no auth servers parshed or whatever it is too, but after that it should say Connection To Steam Successful if its a dedicated server. And people can find my server on the list fine.. I'm behind a d-link 524 router, dsl, and a dynamic ip address. My ports are forwarded but even so, when I give my friends my ip address to join the server it wont work, so they find it on the server list and I find that my port for it will be something different than the ones that are supposed to be forwarded. Pm me and I can try to help with server problems.

[Mopar33l]

Im having the same problem, and i cant even find out what my ip address is. And if i did i wouldnt know how to get to my lynskys page. Can anyone help?

[Amster]

to find out you ip just go to

http://www.whatismyip.com

youll find your router via 192.168.2.1 ...at least mines at that direction.

[Neiko]

Originally posted by Amster@Jul 10 2005, 11:43 AM
to find out you ip just go to

http://www.whatismyip.com

youll find your router via 192.168.2.1 ...at least mines at that direction.
Quoted post

most routers are like that, except some numbers are different. mine is http://192.168.1.1/

And if you have a dynamic IP (i think its that one) your IP changes regurally. (I think its dynamic, correct me if im wrong)

[Joey2cool]

My server doesn't show up either.

In the 'Console' area of my server thingy, it says:

No auth servers parsed
Disabling valve authentication
Adding master server 69.28.151.178:27010
Adding master server 207.173.177.11:27010
Connection to Steam servers successful.

[Neiko]

they all say that D: